Harbor Freight 9 Inch Band Saw Users Manual
- Portable Band Saw Harbor Freight
- Wood Band Saws Harbor Freight
- Harbor Freight 9 Inch Band Saw User's Manual Download
- Harbor Freight 9 Inch Band Saw User's Manual 2017
Central Machinery Harbor Freight replacement parts. CLARKE replacement parts. CRAFTSMAN Sears. SEARS CRAFTSMAN Saw Parts. Set of 2 URETHANE BAND SAW TYRES for SIP 10 inch BandSaw. Free Shipping to EU. Price: $42.88. Set of 2 URETHANE BAND SAW TIRES for IRONSMITH 9' BAND SAW + Toothed Drive Belt. Free Shipping. Price: $39.19. Dec 31, 2016 This is my review of the Harbor Freight 9' bench top band saw. This is NOT a paid or sponsored review. I've owned the band saw for about 2 years now, and decided to share my thoughts just in case.
SKU 93762
For technical questions, please call 1-800-444-3353.
Page 2
contents
important saFetY
inFormation .............. 3
general tool saFetY
warnings ...................3
band saw saFetY warnings ..5
vibration saFetY ..........7
grounding instructions .. 7
grounded tools: tools
with three prong plugs ...7
double insulated tools:
tools with two prong
plugs ......................8
speciFications ............. 9
unpacKing ................. 9
assemblY instructions .... 9
to assemble the stand: ...9
to attach the wheels to
the stand:...............9
to attach the bandsaw
to the stand: ...........10
to attach the stocK
stop assemblY: .........10
to attach the pulleY
cover: .................. 11
to attach the spindle
pulleY and motor Mf 165 manual download.
pulleY: ................. 11
to install the v-belt: .... 11
to adjust the cutting
speed: .................. 11
to convert the bandsaw
For vertical use: .......12
operating instructions .. 14
to use the vise: ..........14
to use the QuicK vise
adjustment For an
angle cut: ..............14
adjustments ...............15
to adjust the stocK
stop: ...................15
adjusting the blade
guide bearings: ........15
adjusting the blade
tracKing: ...............15
adjusting the blade
tension: ................16
adjusting the Feed rate: 17
adjusting the blade
guide bracKets: ........17
basic bandsaw operation --
vertical position: .........18
basic bandsaw operation --
horizontal position: ......19
inspection, maintenance,
and cleaning ............ 21
troubleshooting ...........24
parts list ................ 25
assemblY diagram ........ 27
SKU 93762
For technical questions, please call 1-800-444-3353.
Page 22
Place the new Saw Blade (82) be-
e.
tween each of the Guide assemblies
and around the Upper Blade Wheel
(37) and Lower Blade Wheel (54).
important: the teeth must be
pointing downward toward the
motor. (see Figure u.)
note:
f.
The Bandsaw is equipped
with a 64” diameter, .025” thick,
15/32” wide, 14 teeth per inch Saw
Blade (82). The machine will also
accept Blades in 4, 6, 8, and 10
tooth sizes. The choice of Blade
pitch is determined by the thickness
of the material to be cut. The thinner
the workpiece, the more teeth is rec-
ommended. A minimum of 3 teeth
should engage the workpiece at all
times for proper cutting.
(see Figure u.)
caution: if the teeth of the saw
blade are so far apart that they
straddle the workpiece, severe
damage to the workpiece and/or
saw blade will result.
Tighten the tension on the new Saw
g.
Blade (82) by turning the Blade Ten-
sion Knob (34).
Portable Band Saw Harbor Freight
(see Figure u.)
Close the Blade Back Cover (114).
h.
(see Figure u.)
to replace the v-belt:
4.
The Band-
saw uses a size 0-506 V-Belt (10).
To replace the V-Belt:
v-belt (10)
spindle pulleY
(1)
motor pulleY
(79)
heX bolt
(70)
Figure v
a. Open the Pulley Cover (72).
(see Figure v.)
Loosen the Hex Bolt (70) to release
b.
tension on the old V-Belt.
(see Figure F.)
Remove the old V-Belt (10) from the
c.
two Pulleys (1, 79).
(see Figure v.)
Place the new V-Belt (10) into the
d.
proper Pulley (1, 79) combination for
the desired Blade speed.
(see Figures g and v.)
Adjust the position of the Motor (81)
e.
to obtain approximately 1/2” depres-
sion in the V-Belt (10) when applying
Wood Band Saws Harbor Freight
pressure with your thumb.
(see Figure v.)
Tighten the Hex Bolt (70) to secure
Harbor Freight 9 Inch Band Saw User's Manual Download
f.
the Motor (81) in place.
(see Figure t.)