Sig Sauer P226 Mk25 User Manual
- Sig Sauer P226 Mk25 Accessories
- Sig Sauer P226 Mk25 Threaded Barrel
- Sig Sauer P226
- Sig Sauer P226 Mk25 User Manual Pdf
Sig Sauer P226. World renowned and the choice for many of the premier global military, law enforcement and commercial users. SIG Sauer P226 X-Five CO2 Pistol Instructions Manual SIG Sauer P226 X-Five CO2 Pistol Adjustable Baxs To remove the magazine, press the release (1) located on the left side of the grip. P 226. Read online or download PDF. SIG SAUER P226 X-Five User Manual.
16
USA
17
USA
3. Check trigger travel and trigger interruption.
– With hammer 7 decocked and trigger 16 pulled through,
Panasonic e-ion air conditioner user manual. draw slide 50 back until stop and release.
– Check that the hammer 7 is held back in the cocked
position (trigger stays pulled back).
4. Check trigger function.
– Release trigger 16.
– Check that the trigger bar 24 reengages and that the
hammer 7 is activated when the trigger is pulled again.
5. Check slide catch lever 26.
– Insert empty magazine, draw slide 50 right back and
release slide 50.
– Check that the slide 50 is held in its rearmost position.
– Actuate slide catch lever 26.
– Check that the slide 50 is released and flys forward with
sufficient energy.
– Remove magazine.
6. Check manual safety.
– Draw slide back and release it so that it flys forward
with sufficient energy. Push manual safety up and press
trigger. The trigger may not actuate.
– Push manual safety down and press trigger.
The trigger must actuate.
7. Check magazine.
– Check condition of the magazine tube 69
(lips and floorplate) for signs of damage or dirt.
– Check that the magazine floorplate is properly secured.
– Check easy running and spring action of the feeder 70.
– Check smooth insertion of the magazine into the frame 1.
– Check magazine catch 42 for clean engagement and
release.
8. Check external condition of the pistol.
– Check front sight 67, rear sight 63, grip plates 47/48
and takedown lever 40 for signs of damage or dirt.
– Check firm securing of rear sight 63, front sight 67
and grip plates 47/48.
9. Checking numbered parts.
– Check that the serial numbers of the barrel 57,
the slide 50 and frame 1 correspond.
Maintenance
•
When the recoil spring 62 is inserted into the slide 50,
it becomes preloaded. Uncontrolled insertion of the
recoil spring guide 61 into the slide 50 can cause this
and the recoil spring 62 to jump away and injure you
or others standing nearby.
5. Insert recoil spring system into the slide 50.
6. From the front, slip the complete system onto
the guide of the frame 1.
7. Draw back slide 50 to the rear stop and push up slide
catch lever 26 to arrest the slide 50 in its open position.
8. Push up takedown lever 40 counter-clockwise.
9. Actuate slide catch lever 26; slide 50 flicks forward.
10. Decock the pistol in a safe direction via the trigger.
•
The pistol is unloaded and decocked.
8.5 Checking functions
•
Sig Sauer P226 Mk25 Accessories
Checking of all functions must be made on the
assembled pistol
– to determine any causes of malfunctioning,
– after completion of repairs,
– and after each cleaning and assembly of the pistol.
Procedure
1. Remove the magazine and unload pistol (see section 5.8).
2. Check tension of the recoil spring 62 and ease of
running of the slide 50.
– Draw slide 50 back until stop and allow to fly forward.
– Check that the slide 50 flys forward with sufficient energy
and locks into place.
– Repeat check again.
Notice
Notice
Caution
Maintenance
8
USA
9
USA
5.7 Reloading during shooting
The slide is caught in the open position.
•
Never let the pistol out of your hand.
•
Keep the pistol pointed at the safe target.
Procedure
1. Remove the empty magazine.
2. Insert full magazine and ensure that it engages.
3. Thumb down slide catch lever 26 or draw back slide 50
until stop and allow to fly forward (see section 5.5).
– The pistol is loaded and ready to fire.
– The pistol can also be secured with the manual safety.
– The pistol is now loaded, decocked and ready to fire.
5.8 Unloading the pistol
5.8.1 Unloading the pistol; magazine not empty
•
Never let the pistol out of your hand before it is
unloaded.
•
The pistol is loaded; a round is in the chamber of the
barrel.
•
Perform the unloading action with only two fingers
from the rear.
•
Never place your hand over the slide ejection port.
Procedure
1. Keep the pistol muzzle pointed in a safe direction.
2. Actuate the magazine catch 42 and remove the magazine
(Fig. 2)
3. Pull slide 50 back until stop and push slide catch lever
26 up. The round is ejected and the slide 50 is caught
in the open position.
Warning
Warning
Handling
Fig. 2
5.6 Discharging a shot
•
Ensure that the target and surroundings allow shots to
be fired without danger.
•
Ensure when firing that your fingers, hands or other
parts of the body are not in front of, above or beside
the barrel muzzle or the ejector port.
•
Never allow other people to stand next to you where
they could be hit by ejected cartridge cases.
•
When shooting, always wear ear protection and
protective eyeglasses. Inform other people close
to you about the need to wear ear protection.
•
With pistols with manual safety, the safety lever 29
must be turned in the horizontal position (down).
•
Stop shooting immediately and unload the pistol
if you suspect that a round has not been chambered
correctly, a case is jammed, a round may have blocked
the barrel or a discharge sounds or gives the sensation
that it is 'weak” or unusual.
Sig Sauer P226 Mk25 Threaded Barrel
•
Never try to dislodge a blockage by firing another
round.
Procedure
1. Aim pistol at a safe target.
2. Place finger on trigger 16 and pull back the trigger 16
(discharges a shot).
3. Keep the pistol aimed at the target and fire further
shots as required.
4. Remove the magazine and unload pistol (see section
5.8). If the pistol has been shot until the magazine is
empty, the slide 50 will be caught in the open position.
Reload pistol if further shots are to be fired (see section
5.7).
•
Single action pistols are in a cocked and ready to fire
status after each discharge.
Sig Sauer P226
•
If once you decide to stop shooting, you must imme-
diatly and fully unload the pistol.
Sig Sauer P226 Mk25 User Manual Pdf
Warning
Warning
Handling