• Vital Signs Monitor Wikipedia
• Welch Allyn Spot Vital Signs Manual
• Welch Allyn Vital Signs Monitor User Manual Download

Welch Allyn Spot Vital Signs Monitor, Reset Time and Date Post Battery Replacement or Removal - Quick Reference Guide User Manual English, Set the date and time Text mode. Quick Overview. The Connex® Spot Monitor features an easy-to-use, vivid touchscreen display and provides accurate vital signs measurement including blood pressure averaging, spot checking, interval monitoring and custom scoring across patient populations.

1

The Connex Vital Signs Monitor is an intuitive, touchscreen monitor featuring bright, vivid colors for improved workflows and training. Adaptable for most low-acuity healthcare environments and clinical workflows, it can measure pulse oximetry, non-invasive blood pressure. Welch allyn Connex Vital Signs Monitor 6000 Series Pdf User Manuals. View online or download Welch allyn Connex Vital Signs Monitor 6000 Series Service Manual, Directions For Use Manual.

English

Set the date and time

After recharging a dead battery or after disconnecting the battery for a few minutes, you
must program the date and time screen.

You can change several device operating parameters in the Internal Configuration Mode.
When changed, these settings become the default power-up settings. You will also see
non-changeable device configurations for technical service purposes.

To enter the Internal Configuration Mode:

1.

Turn the Spot Vital Signs off (

).

2.

Press and hold the Blood Pressure Start/Stop (

) and Power (

) buttons. The

device enters the Internal Configuration Mode and displays the software version.

If the device displays E38, press the Next Patient/Clear/Cancel (

) button to

cancel the error.

3.

Press the Mode (

) button to cycle through the Internal Configuration menu until

you see the date option displayed on the screen.

4.

Use the Next Patient/Clear/Cancel (

) or Blood Pressure Start/Stop (

)

buttons to change the default setting.

• Chinese
  • 简体中文

Page 2: Press and hold for a half second, Mode button, Next patient/clear button, Blood pressure start/stop button, Press to start a blood pressure measurement, Temperature operation, Spo2 operation

For detailed operating instructions, refer to the Directions for Use.

On/Off Button

Controls power to the Spot Vital Signs.

Pressure Preset Button

1. Press and hold for a half second.
2. Press again to scroll through presets. After one blood pressure measurement the Spot

Vital Signs returns to the default inflation pressure.

Mode Button

1. Press and hold button down for 2 seconds to turn backlight off/on.
2. Remove temperature probe and press once to switch from oral to axillary mode.
3. Press to bring the Spot Vital Signs out of standby/sleep mode.

Next Patient/Clear Button

Clears all data from the device. Cancels active blood pressure measurement.

Always press the Clear Button before taking vitals on a new patient.

Blood Pressure Start/Stop Button

1. Press to start a blood pressure measurement.
2. Press again to cancel the blood pressure measurement.

Temperature Operation

Verwarm ingselemente12V220/240VCD1110988Union9Jet10Burner11 Bu rnerBracket8Connexion9Injecteur10 Bruleur11 Console deBruleurLNEBrown, Brun,BruinBlue, Bleu, BlauwGreen-and-yellow, Vert-et-jaune,Groen/geel8 Koppeling9 Inspuiter10 Brander11 B randerhu is123Brown, Brun,BruinBlack, Noir, ZwartGreen-and-yellow, Vert-et-jaune,Groen/geelFig. 2Fig.3ThermostatThermostaatHeatersElements chauffants. 11ControlPanel2 TravelCatch.3FrozenFoodStorageCompartment(U)Lf21TableaudereglageI2Arretdeporte3Compartimentitbassetemperature(U)1Bedieningspaneel2 Deurvergrendel ing33Diepvries bewaarvak0Fig.14 5 6 74Buttonforigniter5 Combinedgascontrol andflame failure device6Voltage selector switch7Electricthermostat(220/240V)4Boutonde Iallumeur5Dispositif dereglagede gazetdesecurite6Commutateur(220V)7Thermostatelectrique (220V)4 Knop voorontsteker5Gekombineerde gaskraanenvlambeveiliging6Voltage keuze-knop7Thermostaat(alleenvoor220/240V)(a)(b)Fig. Dometic 3 way fridge user manual.

1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
3. Place probe in contact with patient tissue as directed in the manual.
4. When done, single beep is heard and the temperature is displayed. Return probe.

SpO

2

Operation

1. Apply sensor to patient and verify pulse signal bar graph.
2. SpO

2

measurement and pulse rate update continuously for 10 minutes.

For detailed operating instructions, refer to the Directions for Use.

On/Off Button

Controls power to the Spot Vital Signs.

Pressure Preset Button

1. Press and hold for a half second.
2. Press again to scroll through presets. After one blood pressure measurement the Spot

Vital Signs returns to the default inflation pressure.

Mode Button

1. Press and hold button down for 2 seconds to turn backlight off/on.
2. Remove temperature probe and press once to switch from oral to axillary mode.
3. Press to bring the Spot Vital Signs out of standby/sleep mode.

Next Patient/Clear Button

Clears all data from the device. Cancels active blood pressure measurement.

Always press the Clear Button before taking vitals on a new patient.

Blood Pressure Start/Stop Button

1. Press to start a blood pressure measurement.
2. Press again to cancel the blood pressure measurement.

Temperature Operation

1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
3. Place probe in contact with patient tissue as directed in the manual.
4. When done, single beep is heard and the temperature is displayed. Return probe.

SpO

2

Operation

1. Apply sensor to patient and verify pulse signal bar graph.
2. SpO

2

measurement and pulse rate update continuously for 10 minutes.

For detailed operating instructions, refer to the Directions for Use.

On/Off Button

Controls power to the Spot Vital Signs.

Pressure Preset Button

1. Press and hold for a half second.
2. Press again to scroll through presets. After one blood pressure measurement the Spot

Vital Signs returns to the default inflation pressure.

Mode Button

1. Press and hold button down for 2 seconds to turn backlight off/on.
2. Remove temperature probe and press once to switch from oral to axillary mode.
3. Press to bring the Spot Vital Signs out of standby/sleep mode.

Next Patient/Clear Button

Clears all data from the device. Cancels active blood pressure measurement.

Always press the Clear Button before taking vitals on a new patient.

Blood Pressure Start/Stop Button

1. Press to start a blood pressure measurement.
2. Press again to cancel the blood pressure measurement.

Temperature Operation

1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
3. Place probe in contact with patient tissue as directed in the manual.
4. When done, single beep is heard and the temperature is displayed. Return probe.

SpO

2

Operation

1. Apply sensor to patient and verify pulse signal bar graph.
2. SpO

2

measurement and pulse rate update continuously for 10 minutes.

For detailed operating instructions, refer to the Directions for Use.

On/Off Button

Controls power to the Spot Vital Signs.

Pressure Preset Button

1. Press and hold for a half second.
2. Press again to scroll through presets. After one blood pressure measurement the Spot

Vital Signs returns to the default inflation pressure.

Mode Button

1. Press and hold button down for 2 seconds to turn backlight off/on.
2. Remove temperature probe and press once to switch from oral to axillary mode.
3. Press to bring the Spot Vital Signs out of standby/sleep mode.

Next Patient/Clear Button

Clears all data from the device. Cancels active blood pressure measurement.

Always press the Clear Button before taking vitals on a new patient.

Blood Pressure Start/Stop Button

1. Press to start a blood pressure measurement.
2. Press again to cancel the blood pressure measurement.

Temperature Operation

1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
3. Place probe in contact with patient tissue as directed in the manual.
4. When done, single beep is heard and the temperature is displayed. Return probe.

SpO

2

Operation

1. Apply sensor to patient and verify pulse signal bar graph.
2. SpO

2

measurement and pulse rate update continuously for 10 minutes.

Spot Vital Signs
Quick Reference Card

Spot Vital Signs
Quick Reference Card

Spot Vital Signs
Quick Reference Card

Spot Vital Signs
Quick Reference Card

For detailed operating instructions, refer to the Directions for Use.

On/Off Button

Controls power to the Spot Vital Signs.

Pressure Preset Button

1. Press and hold for a half second.
2. Press again to scroll through presets. After one blood pressure measurement the Spot

Vital Signs returns to the default inflation pressure.

Mode Button

1. Press and hold button down for 2 seconds to turn backlight off/on.
2. Remove temperature probe and press once to switch from oral to axillary mode.
3. Press to bring the Spot Vital Signs out of standby/sleep mode.

Next Patient/Clear Button

Clears all data from the device. Cancels active blood pressure measurement.

Always press the Clear Button before taking vitals on a new patient.

Blood Pressure Start/Stop Button

1. Press to start a blood pressure measurement.
2. Press again to cancel the blood pressure measurement.

Temperature Operation

1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
3. Place probe in contact with patient tissue as directed in the manual.
4. When done, single beep is heard and the temperature is displayed. Return probe.

SpO

2

Operation

1. Apply sensor to patient and verify pulse signal bar graph.
2. SpO

2

measurement and pulse rate update continuously for 10 minutes.

For detailed operating instructions, refer to the Directions for Use.

On/Off Button

Controls power to the Spot Vital Signs.

Pressure Preset Button

1. Press and hold for a half second.
2. Press again to scroll through presets. After one blood pressure measurement the Spot

Vital Signs returns to the default inflation pressure.

Mode Button

1. Press and hold button down for 2 seconds to turn backlight off/on.
2. Remove temperature probe and press once to switch from oral to axillary mode.
3. Press to bring the Spot Vital Signs out of standby/sleep mode.

Next Patient/Clear Button

Clears all data from the device. Cancels active blood pressure measurement.

Always press the Clear Button before taking vitals on a new patient.

Blood Pressure Start/Stop Button

1. Press to start a blood pressure measurement.
2. Press again to cancel the blood pressure measurement.

Temperature Operation

1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
3. Place probe in contact with patient tissue as directed in the manual.
4. When done, single beep is heard and the temperature is displayed. Return probe.

SpO

2

Operation

1. Apply sensor to patient and verify pulse signal bar graph.
2. SpO

2

measurement and pulse rate update continuously for 10 minutes.

For detailed operating instructions, refer to the Directions for Use.

On/Off Button

Controls power to the Spot Vital Signs.

Pressure Preset Button

1. Press and hold for a half second.
2. Press again to scroll through presets. After one blood pressure measurement the Spot

Vital Signs returns to the default inflation pressure.

Mode Button

1. Press and hold button down for 2 seconds to turn backlight off/on.
2. Remove temperature probe and press once to switch from oral to axillary mode.
3. Press to bring the Spot Vital Signs out of standby/sleep mode.

Next Patient/Clear Button

Clears all data from the device. Cancels active blood pressure measurement.

Always press the Clear Button before taking vitals on a new patient.

Blood Pressure Start/Stop Button

1. Press to start a blood pressure measurement.
2. Press again to cancel the blood pressure measurement.

Temperature Operation

1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
3. Place probe in contact with patient tissue as directed in the manual.
4. When done, single beep is heard and the temperature is displayed. Return probe.

SpO

2

Operation

1. Apply sensor to patient and verify pulse signal bar graph.
2. SpO

2

measurement and pulse rate update continuously for 10 minutes.

For detailed operating instructions, refer to the Directions for Use.

On/Off Button

Controls power to the Spot Vital Signs.

Pressure Preset Button

1. Press and hold for a half second.
2. Press again to scroll through presets. After one blood pressure measurement the Spot

Vital Signs returns to the default inflation pressure.

Mode Button

1. Press and hold button down for 2 seconds to turn backlight off/on.
2. Remove temperature probe and press once to switch from oral to axillary mode.
3. Press to bring the Spot Vital Signs out of standby/sleep mode.

Next Patient/Clear Button

Clears all data from the device. Cancels active blood pressure measurement.

Vital Signs Monitor Wikipedia

Always press the Clear Button before taking vitals on a new patient.

Blood Pressure Start/Stop Button

1. Press to start a blood pressure measurement.
2. Press again to cancel the blood pressure measurement.

Temperature Operation

1. Select the appropriate temperature probe. Blue = Oral/Axillary, Red = Rectal.
2. Remove probe and wait for OrL to appear on the display. Apply a new probe cover.
3. Place probe in contact with patient tissue as directed in the manual.
4. When done, single beep is heard and the temperature is displayed. Return probe.

SpO

2

Operation

1. Apply sensor to patient and verify pulse signal bar graph.
2. SpO

2

Welch Allyn Spot Vital Signs Manual

measurement and pulse rate update continuously for 10 minutes.

Spot Vital Signs
Quick Reference Card

Spot Vital Signs
Quick Reference Card

Spot Vital Signs
Quick Reference Card

Spot Vital Signs
Quick Reference Card

Welch Allyn Vital Signs Monitor User Manual Download